Finally there has been some progress with the frame. The body is on the frame for mock up purposes and as always there are a lot of things that has to be done differently.
This is the main problem. At ride height the rear frame will be 150mm from the ground and the trailing are arms already pointing upwards. Relatively easy fix though, just needs new mounting tabs to be welded 100mm higher. Pushrod will also need to be relocated.
 |
| Under the hood everything is fine. |
 |
| Four links also need new tabs. |
 |
| Front tires need to be 22", otherwise there's no room for upward movement. I will also need to raise rear fenders a little, I did not want to do that but looks like there's no alternative if I want to keep this stance with bigger than 26" tire. |
